Operation Manual

Turning the SchwitzKM™ On/Off

To turn the SchwitzKM™ on, firmly press and hold the button for approximately three (3) seconds until you hear the power-up sound and see a blue LED. Once the SchwitzKM™ is turned on, it is designed to be left on continuously 24/7.

When turning off the SchwitzKM™, firmly press and hold the button for approximately five (5) seconds and you will hear the power-down sound, then release the button. Red LED will blink 4 times just before the SchwitzKM™ powers off.

Pairing SchwitzKM™ to Android Phone (Samsung,)

No app is required. Pairing only needs to occur one time. Simply turn on the SchwitzKM™ and the blinking blue LED will indicate that the SchwitzKM™ is ready to pair with the phone. (It is only during this pairing/bonding period that the blue LED will be blinking on the SchwitzKM™.)

On your phone go to Settings, then to Connections.
Next go to Bluetooth, and turn Bluetooth on.
In your Bluetooth settings, under Available devices, tap “SchwitzKM™ ” (e.g., SchwitzKM™_3AE2).

4. On your phone go to Settings, then to Connections.

5. Next go to Bluetooth, and turn Bluetooth on.

6. In your Bluetooth settings, under Available devices, tap “SchwitzKM™” (e.g., SchwitzKM™_3AE2).

Note : If the SchwitzKM™ name is not displayed, tap “Scan” to refresh the list. If the SchwitzKM™ still doesn’t appear, simply turn the SchwitzKM™ off by firmly pressing and holding the button down until you bypass four (4) red LED blinks and hear the power-down sound, then release the button. While the SchwitzKM™ is off, turn Bluetooth off on your phone and then turn it back on. Turn the SchwitzKM™ back on by firmly pressing and holding the button for approximately four (4) seconds until you hear the power-up sound and see a blue LED. Lastly, tap “Scan” to refresh the list again. From there the SchwitzKM™ should appear.

7. On the Bluetooth pairing request pop-up, select Pair. A solid blue light on the SchwitzKM™ and a connection sound will confirm a successful pairing.

Note : If your OS version is asking for a mouse app to be installed at any time, please ignore the request by closing the pop-up, as an app is not needed to use the SchwitzKM™

8. Keep the SchwitzKM™ next to your phone for 30 seconds for the connection to be fully established before using the SchwitzKM™.

9. On your phone, go to Settings and turn off Bluetooth. Move SchwitzKM™ to hear separation alert. Turn Bluetooth back on to hear reconnect sound. (This shows that the SchwitzKM™ is working.) Put phone down and walk away with SchwitzKM™ until you hear a separation alert (approximately 50 feet to 150 feet). It is important to continue to walk until you hear the alert because in some environments there may be longer alert distances. This is your default alert distance for this environment. Use the SchwitzKM™ at its default settings before making any fine-tuning adjustments.

Connectivity Check — Single Tap

A “Tap” represents a quick press and release of the action button.

1 Click = Connectivity check (LED illuminates blue or red through the front of the SchwitzKM™) .
No LED = SchwitzKM™ is off .
Blinking Blue LED = SchwitzKM™ is ready to pair to a single phone .
Solid Blue LED = phone is nearby and connected to SchwitzKM™
Red LED = problem with Bluetooth connection or phone is not nearby
Blue LED & Red LED together =during transition stage, to be ignored.

Setting Alert Distance — Double Tap

There are two (2) alert distance settings to help fine-tune your SchwitzKM™ based on your environment. The SchwitzKM™ can be put into “Adjusting Alert Distance” mode by quickly pressing the button two (2) consecutive times. The following beep(s) that you hear indicates the SchwitzKM™’s current alert distance setting. The default is at setting 2, which is represented by two (2) beeps- this is far distance setting. Once in this mode, a quick single press of the button will bring to one (1) beeps- this is near distance setting. Setting 1 & 2 come in rotation.

To exit this mode, once you get to the selection that you want, stop pressing the button, wait a few seconds, and the SchwitzKM™ will automatically lock in that setting (indicated by a confirmation tune) and exit out of the “Adjusting Alert Distance” mode and return to normal operation.

Selecting Alert Tune — 3 Taps

To change the alert tune, the SchwitzKM™ must be put into "Selecting Alert Tune" mode by quickly pressing the button three (3) times, after which you will hear the current selected alert tune. After you hear this, a single press of the button will toggle to the next available alert tune in the tune selection. There are three alert tunes to select from.

To exit this mode, once you get to the alert tune selection that you want, stop pressing the button, wait a few seconds, and the SchwitzKM™ will automatically lock in that setting (indicated by a confirmation tune) and exit out of the "Selecting Alert Tune" mode and return to normal operation.

Multiple alert tunes encompass a variety of alert pitches, and frequencies, thus allowing those who hear better at specific frequencies to find a suitable audible sound. Some alert tunes may be more practical in loud industrial environments.

Selecting different tunes can also be helpful if there are two or more SchwitzKM™s within the same household or office; however, longer tunes will slightly shorten battery life depending on the average number of daily alerts

Here's how to unpair the SchwitzKM™ from Android Phone (Samsung,)

Android (Samsung)

1. On your phone, go to Settings, then to Connections.

2. Next, go to Bluetooth; in your Bluetooth settings, under Paired devices, locate the SchwitzKM™ name (e.g., SchwitzKM™_3AE2) and tap on the ⚙ Settings icon to the right of it.

Note: Paired Bluetooth devices will only be displayed when Bluetooth is enabled or turned on.

3. You will be prompted to confirm your selection; tap Unpair at the bottom.

4. Turn the SchwitzKM™ off by firmly pressing and holding the button down until you bypass four (4) red LED blinks, and hear the power-down sound, then release the button.

5. Then turn the SchwitzKM™ back on by firmly pressing and holding the button down until you hear the power-up sound and see a blinking blue light.

6. The SchwitzKM™ is now ready for immediate pairing to a new phone.

7. Follow the steps above to pair the SchwitzKM™ to an Android (Samsung), Android (Google Pixel), or iPhone.

Product Overview

The SchwitzKM™ is a user-friendly, Bluetooth® short-range phone remember gadget. It is designed to alert when it is no longer in proximity of the paired phone. Once paired, the SchwitzKM™ can be fine-tuned to longer (or shorter) distances to a limited extent based on your environment and selected alert distance setting preference.

The SchwitzKM™ will alert when you are no longer in proximity of your phone. Alert distance ranges can vary greatly and may be shorter or further for some phone models and environments, especially if both the SchwitzKM™ and phone are outside in an open space/area and there are no obstructions — e.g., buildings, walls, doors, trees, or even people.

Using the SchwitzKM™ is without the use of a mobile app and without any location services, which prevents draining the phone's battery and tracking the user, thus respecting the user's privacy. (Total privacy).

The SchwitzKM™ will alert the user before the phone is lost rather than being a gadget that finds the phone after it is lost. Losing a phone is stressful and the SchwitzKM™ is there to prevent that from happening.

By design, the SchwitzKM™ will not continue to provide in-range or out-of-range proximity phone alerts if the SchwitzKM™ has not been physically moved for an extended period of time (approx 15 minutes) and is in sleep state and saving battery. The SchwitzKM™ will return to normal operation once moved, providing an alert to let the user know if the phone is or is not in proximity of the SchwitzKM™.

In addition, during sleep state turning Bluetooth oﬀ then on via the phone will not cause disconnect and reconnect alerts respectively on the SchwitzKM™. This prevents alerts in the middle of the night during automatic iOS or Android software updates, which reboot phones.

PHONE’S BLUETOOTH MUST REMAIN ON FOR SchwitzKM™ TO WORK PROPERLY

Important Notes

SchwitzKM™ is designed to be kept on 24/7. You must also keep your phone’s Bluetooth on for the SchwitzKM™ to function properly.
If you are experiencing more alerts than desired, simply increase the range by pressing the button two (2) times; wait for the beeps to indicate the current setting, then single-press to increment (to 2 beeps – far setting).
If you like to keep your keys in your pocket at all times with the SchwitzKM™ attached, and you regularly walk in and out of proximity of your phone, to avoid unwanted alerts inside your home or office, you may find it useful to keep the SchwitzKM™ in the pocket of the driver's side car door. When your car door is opened, the SchwitzKM™ will wake up and alert if you don't have your phone with you, thus preventing you from driving off without your phone.

Phone Compatibility

Apple iPhone (iOS) Samsung (Android) Google Pixel (Android)

If the phone is not on the above list it does not mean the SchwitzKM™ is not compatible. Instead, it means the SchwitzKM™ has not been tested on the phone and SchwitzKM™ cannot guarantee or warrant that the SchwitzKM™ will work with it.

Not Compatible :

KaiOS

Android Go Edition Nokia

Most "feature phones" (e.g., flip phones without a touch screen) Apple or Samsung phones with modified mobile OS (i.e., jailbroken)

More than one SchwitzKM™ on same phone

It is possible to have multiple items (e.g., keys, handbags, backpacks, etc.) with a different SchwitzKM™ attached to each of them, with all of the SchwitzKM™ s connected to the same phone. In cases such as this, it is very easy for any one or more of the personal items to not be used for extended periods of time, while other items are being used more frequently.

The SchwitzKM™s that are attached to the less frequently used items will automatically adjust to a minimum power state to save on battery consumption. The SchwitzKM™ is designed to perform self-diagnosis, which is why it is not necessary nor recommended to turn it off, but rather keep it on 24/7 and let the SchwitzKM™ make adjustments for you as you go.

When a SchwitzKM™ is finally moved after being dormant for long periods of time, it will immediately activate and resume normal operations as a phone reminder.

Battery (CR2032)

With the SchwitzKM™ being kept on continuously 24/7 and actively used, the approximate battery life is up to one (1) year. When not being actively used, for example multiple SchwitzKM™s each on a handbag awaiting use, other in backpack awaiting use, the battery life is extended as the SchwitzKM™ goes into a standby state awaiting usage. Battery life will vary based on usage and the number of alerts received per day.

Note : Exposing the SchwitzKM™ to excessive temperatures (above 50ºC), such as leaving it on a car dash on a sunny day, will significantly reduce battery life or exceed safe temperatures for the battery.

If the SchwitzKM™ is no longer sending out alerts or the button appears to be functioning incorrectly, check to make sure the SchwitzKM™'s outer case is properly snapped into place. If the case is not completely closed, the SchwitzKM™ may malfunction. If the SchwitzKM™ still does not work, the battery most likely needs to be replaced.

Low Battery Warning :

When the battery starts to get low, the loudness of the alerts will be noticeably reduced and/or the LEDs will become dimmer, especially the blue LED. Eventually, the blue LED will stop illuminating, which indicates that the battery is exhausted. At this point, it's recommended to replace the battery with a new one.

Battery Replacement :

The SchwitzKM™ contains a CR2032 coin cell battery. The battery may need replacement. Replace only with batteries of the same type and rating, while observing the correct polarity. Don't press anything sharp on the SchwitzKM™'s inner components and keep the SchwitzKM™ free from dust and moisture.

Note: When the battery is replaced, the SchwitzKM™ will have to be turned on manually by pressing and holding the button firmly for 3 seconds and connect to the phone if it is within close proximity of the SchwitzKM™.

To replace the battery :

1. Use an average blunt dinner knife (or small flat-head screwdriver) to remove the front cover by inserting the tip of the knife (or screwdriver) into the small slit near the key ring area. Insert a new CR2032 coin battery into the battery slot with the positive side up.

CR2032 batteries with bitterant coatings might not work with the SchwitzKM™. Replace the cover, making sure all corners of the cover are fully snapped in. (This is very important as the SchwitzKM™ will not function properly without the cover being securely fastened.)

2. Once the battery is replaced and the SchwitzKM™ is turned back on, the SchwitzKM™ will
be restored back to its default alert distance and alert tune settings. The SchwitzKM™ will still
be paired to the phone.

Battery Safety :

This product contains a preinstalled CR2032 3V (LiMnO2) coin battery. KEEP OUT OF REACH OF CHILDREN Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.

Transferring SchwitzKM™ to New Phone

After the initial pairing, if the SchwitzKM™ is to be paired with a different phone, it will need to be unpaired from the first phone. Otherwise you may get error or difficulty in pairing with the new phone.

Here’s how to unpair the SchwitzKM™ from your Android (Samsung), if needed:

1. On your phone, go to Settings, then to Connections.

2. Next, go to Bluetooth; in your Bluetooth settings, under Paired devices, locate the SchwitzKM™ name (e.g., SchwitzKM™_3AE2) and tap on the ⚙ Settings icon to the right of it.

Note: Paired Bluetooth devices will only be displayed when Bluetooth is enabled or turned on.

3. You will be prompted to confirm your selection; tap Unpair at the bottom.

4. Turn the SchwitzKM™ off by firmly pressing and holding the button down until you bypass four (4) red LED blinks, and hear the power-down sound, then release the button.

5. Then turn the SchwitzKM™ back on by firmly pressing and holding the button down until you hear the power-up sound and see a blinking blue light.

6. The SchwitzKM™ is now ready for immediate pairing to a new phone.Then turn the SchwitzKM™ back on by firmly pressing and holding the button down until you hear the power-up sound and see a blinking blue light.

7. Follow the steps above to pair the SchwitzKM™ to an Android (Samsung), Android (Google Pixel), or iPhone.

Do not use the SchwitzKM™ as a wireless leash (for monitoring proximity) of children or animals.

Pairing SchwitzKM™ to iOS (iPhone)

iOS (iPhone)

1. On your phone go to Settings, then to Bluetooth, and turn Bluetooth on.

2. In your Bluetooth settings, under Other Devices, tap “SchwitzKM™” (e.g.,SchwitzKM™_3AE2).

Note: If you don’t see the SchwitzKM™ in the list, simply turn the SchwitzKM™ off by firmly pressing and holding the button down until you bypass four (4) red LED blinks, While the SchwitzKM™ is off, turn Bluetooth off on your phone and then turn it back on. Lastly, turn the SchwitzKM™ back on by firmly pressing and holding the button for approximately four (4) seconds until you hear the power-up sound and see a blue LED. From there the SchwitzKM™ should show on the list.

3. On the Bluetooth Pairing Request pop-up, select Pair. A solid blue light on the SchwitzKM™ and a connection sound will confirm a successful pairing.

4. Keep the SchwitzKM™ next to your phone for 30 seconds for the connection to be fully established before using the SchwitzKM™

5. On your phone, go to Settings and turn off Bluetooth. Move SchwitzKM™ to hear separation alert. Turn Bluetooth back on to hear reconnect sound. (This shows that the SchwitzKM™ is working.) Put phone down and walk away with SchwitzKM™ until you hear a separation alert (approximately 50 feet to 150 feet). It is important to continue to walk until you hear the alert because in some environments there may be longer alert distances. This is your default alert distance for this environment. Use the SchwitzKM™ at its default settings before making any fine-tuning adjustments.

Here's how to unpair the SchwitzKM™ from your iOS (iPhone)

iOS (iPhone)

1. On your phone, go to Settings, then to Bluetooth.

2. In your Bluetooth settings, under My Devices, locate the SchwitzKM™ name (e.g., SchwitzKM™_3AE2) and tap on the "i" icon to the right of it; select Forget This Device.

Note: My Devices will only be displayed when Bluetooth is enabled or turned on.

3. In the resultant pop-up, tap on Forget Device to confirm the unpairing of the SchwitzKM™ from your phone.

4. Turn the SchwitzKM™ off by firmly pressing and holding the button down until you bypass four (4) red LED blinks and hear the power-down sound, then release the button.

5. Then turn the SchwitzKM™ back on by firmly pressing and holding the button down until you hear the power-up sound and see a blinking blue light.

6. The SchwitzKM™ is now ready for immediate pairing to a new phone.

[Optional] If you decide to pair the SchwitzKM™ back with the same phone that you unpaired it from, you will need to close the Settings app completely. To do that, simply swipe up from the bottom of the screen and pause in the middle of the screen. If multiple apps are open, then swipe right or left to find the Settings app. Once you see the Settings app's preview, swipe up on the app's preview to close the app. This clears any of the phone's previously saved settings with regard to the SchwitzKM™. You will need to re-open the Settings app to begin the new pairing process.

SchwitzKM™

SchwitzKM™